Bianca by Mosaic

WASTE BIN STORE, REFUSE AND FIRE PUMP ROOMS 

Primer: Hychem E100, a solvent-based two-component epoxy primer. 

Epoxy Base Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating. 

Non-Slip Aggregate: Appropriate nonslip aggregate. 

Epoxy Wear Coat: Hychem SupaFloor, a high build, multi-purpose pigmented epoxy coating. 

HYDRANT & FIRE BOOSTER CUPBOARDS 

Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required). 

Primer: WPA 360, a one-part, water-based primer. 

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement. 

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane. (Minimum of 2 coats to achieve a DFT of 1000 microns). 

WINDOW & DOOR REVEALS 

Primer: WPA 460, a two-part water-based epoxy primer. 

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology. 

Membrane: WPA 230UV, one part fibre reinforced water based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

INTERNAL WET AREAS (TILED) 

Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required). 

Primer: WPA 360, a one-part, water-based primer. 

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes. 

Fillets / Bond Breaker: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology. 

Membrane: WPA 500, a one-part fibre-reinforced waterborne under-tile membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

Tile Adhesive: TPA Lite, a premium grade C2S2, white, fibre-reinforced, flexible cement-based tile adhesive. 

Tile Grout: TPA Tru Colour Grout, is a high-performance stain & efflorescence resistant grout. 

Movement Joints: TPA Tru Colour Sanitary Silicone, is a mould-resistant, non-diluted, high-performance, UV-resistant, neutral cure silicone sealant. drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

TERRACES & BALCONIES (PEDESTALS) 

Primer: WPA 460, two-part water-based epoxy primer. 

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes. 

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions, and general areas subject to movement. 

Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

Pedestal System: Keksia NM Pedestal System, a modular and adjustable pedestal support system for raised indoor and outdoor floors. 

Planter Boxes Primer: WPA 460, two-part water-based epoxy primer. 

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology. 

Membrane above Soil Level: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane. (Minimum of 2 coats to achieve a DFT of 1000 microns).

Non-Porous Surfaces: WPA SB, is a clear fast-drying solvent-based primer. 

Transitions: WPA FC, is a high-performance, fast cure, one-component polyurethane sealant. 

Membrane: WPA 992, a one-part liquid applied moisture-cured polyurethane membrane system, with the addition of WPA 992 Root Inhibitor Additive, root inhibitor membrane additive (minimum 2 coats to achieve a DFT of no less than 1200 microns). 

Membrane Protection: WPA Drainage Cell, a drainage cell and root-resistant protection board. 

POOL STRUCTURE 

Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required). 

Primer: WPA 560, two-part water-based epoxy designed as a water and vapour-proof coating. 

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement. 

Membrane: WPA 200, a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

WATER TANK & RETENTION TANK 

Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement. 

Membrane: WPA 100, a single component, fibre-reinforced, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 2000 microns). 

SWIMMING POOL 

Slurry Bond Coat: Laticrete 335, a high-performance thin-bed adhesive for installing a wide range of tiles and stone. 

Render/ Mortar Beds: Laticrete 3701 Fortified Mortar Bed, a polymer-fortified blend of carefully selected polymers, Portland cement and graded aggregates 

Moisture Shield: LATAPOXY Moisture Shield, a 2 component, epoxy coating specifically designed to reduce moisture vapour emissions. 

Membrane: Laticrete Hydro Ban, a thin, load-bearing waterproofing/crack isolation membrane. 

Tile Adhesive: Laticrete 335, a high-performance thin-bed adhesive for installing a wide range of tiles and stones including low absorption ceramic and porcelain tiles, natural and manufactured stone. 

Tile Grout: Laticrete Permacolor Grout, a high-performance, fast-setting grout 

Sealant: Laticrete Latasil Sealant, a high-performance, one-component, neutral cure, 100% silicone sealant designed for ceramic tile and stone applications (primed with Laticrete 9118 primer). 

POOL DECK (TIMBER) 

Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1 (if required). 

Primer: WPA 460, a two-part, water-based epoxy primer. 

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes, 

Fillets / Bond Breaker: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement. 

Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

Pedestal System: Keksia NM Pedestal System, a modular and adjustable pedestal support system for raised indoor and outdoor floors (if required).

EXPOSED CONCRETE ROOF, LIFT OVERRUN & ROOF PLANT AREAS 

Primer: WPA 460, a two-part, water-based epoxy primer. 

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes, 

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology. 

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns). 

Topcoat (Trafficable Areas): WPA TuffCote, a hard-wearing, slip-resistant topcoat for external floor surfaces. 

OSD TANK ROOF (BALLAST ROCK) & CONCRETE SUN HOODS 

Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed. 

Primer: WPA 460, a two-part, water-based epoxy primer. 

Non-Porous Surfaces: WPA 160, a specialised solvent-free primer designed for enhancing the adhesion of subsequent membranes, 

Transitions: WPA SPUR, a high quality, professional, universal, low modulus sealant based on hybrid technology. 

Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).