Window Reveals & SillsÂ
Primer: WPA 460, a two-part water-based epoxy primer.
Transitions: WPA MS, is a single-component, moisture-cured silane-modified hybrid sealant.
Membrane: WPA 230UV, one part fibre reinforced water based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Wet AreasÂ
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, a two-part, water-based epoxy primer.
Fillets /Â Bond Breaker: WPA MS, is a single-component, moisture-cured silane-modified hybrid sealant.
Membrane: WPA Rapid, a waterborne, flexible waterproofing membrane, utilising next-generation, self-crosslinking technology (minimum of 2 coats to achieve a DFT of 800 microns).
Screed: Site mixed screed in accordance with AS 3958.1 or ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas (if required).
Balconies
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, a two-part, water-based epoxy primer.
Fillets /Â Bond Breaker: WPA MS, is a single-component, moisture-cured silane-modified hybrid sealant.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Screed: Site mixed screed in accordance with AS 3958.1 or ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas.Â
Water Metre Cupboards
Preparatory: Appropriate 1:100 falls to the drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, a two-part, water-based epoxy primer.
Transitions: WPA FC, is a high-performance, fast cure, one-component polyurethane sealant.
Membrane: WPA 992, one-part liquid applied moisture-cured polyurethane membrane system (minimum 2 coats to achieve a DFT of no less
than 1200 microns).
Exposed Concrete Roof
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 560, two-part water-based epoxy primer.
Transitions: WPA MS, is a single-component, moisture-cured silane-modified hybrid sealant.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Topcoat: Protek Synpave Trafficable, one-part water-based slip-resistant UV stable trafficable coating.Â
PodiumÂ
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, a two-part, water-based epoxy primer.
Fillets /Â Bond Breaker: WPA FC, is a high-performance, fast-cure, one-component polyurethane sealant.
Membrane: WPA 992, one-part liquid applied moisture-cured polyurethane membrane system (minimum 2 coats to achieve a DFT of no less than 1200 microns).
Planter BoxesÂ
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, two-part water-based epoxy primer.
Transitions: WPA MS, is a single-component, moisture-cured silane-modified hybrid sealant.
Membrane above Soil Level:   WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Transitions: WPA FC, is a high-performance, fast cure, one-component polyurethane sealant.
Membrane: WPA 992, one-part liquid applied moisture-cured polyurethane membrane system (minimum 2 coats to achieve a DFT of no less than 1200 microns).
Membrane Protection: WPA Drainage Cell, a drainage cell and root-resistant protection board.
