Case Studies

Internal Case Studies

Home Case Studies Internal Case Studies Rise Apartments

Tomkins Commercial was awarded the design and construction for RISE Apartments, Maroochydore.

RISE APARTMENTS

67-71 Sixth Avenue
MAROOCHYDORE QLD 4558

Date: August 2018

Project: Rise Apartments

Builder: Tomkins Commercial Builders

Applicator: ADA Waterproofing

Application: Waterproofing Systems

Minutes from the City’s Centre

Tomkins Commercial was awarded the design and construction for RISE Apartments, Maroochydore.

Rise Maroochydore is a new development on Sixth Avenue in Maroochydore, just a minute’s walk to Cotton Tree and the emerging Maroochydore City Centre currently under construction on the Sunshine Coast. The 12-storey development houses 48 units with two and three-bedroom apartments, along with the four-bedroom penthouses.

There is also a single-level basement, 2 levels of above-ground car parking and resident facilities including a café, fitness room, swimming pool and BBQ terrace.

Products Specified

LIFT PIT AREA

Membrane: CETCO-Volclay Voltex DS/SWR.
Transitions: CETCO-Volclay Water Stoppage.
Detail Sealant: CETCO-Volclay Bentoseal.
Membrane Protection: Coreflute Protection Board.

BASEMENT UNDER SLAB

Membrane: CETCO-Volclay Voltex DS/SWR.
Transitions: CETCO-Volclay Water Stoppage.
Detail Sealant: CETCO-Volclay Bentoseal.

RETAINING WALLS (IN-SITU CONCRETE / SHOTCRETE)

Membrane: CETCO-Volclay Voltex DS/SWR.
Transitions: CETCO-Volclay Water Stoppage.
Detail Sealant: CETCO-Volclay Bentoseal.
Membrane Protection: Coreflute Protection Board.

MASONRY BLOCK RETAINING WALLS

Membrane: CETCO-Volclay Ultraseal BT.
Overlaps: CETCO-Volclay Seam Tape.
Transitions: CETCO-Volclay Water Stoppage.
Detail Sealant: CETCO-Volclay Bentoseal.
Membrane Protection: Coreflute Protection Board.

WINDOW REVEALS & SILLS

Primer: WPA 460, two-part water-based epoxy primer.
Transitions: Admil SupaSeal PU, a hybrid sealant.
Membrane: WPA 230UV, one part fibre reinforced water-based polyurethane membrane.

PLANTER BOXES

Primer: WPA 460, two-part water-based epoxy primer.
Transitions: WPA Elastoband.
Membrane: WPA 200.
Membrane Protection: WPA Drainage Cell, drainage cell and root-resistant protection board.

INTERNAL WET AREAS

Primer: WPA 360, one-part water-based primer.
Fillets/Bond Breaker: Admil SupaSeal PU, hybrid sealant.
Membrane: WPA 500, one part fibre reinforced waterborne under tile membrane.

SUNHOODS

Primer: WPA 460, two-part water-based epoxy primer.
Membrane: WPA 230UV, one part fibre reinforced water-based polyurethane membrane.

BALCONIES & TERRACES

Primer: WPA 460, two-part water-based epoxy primer.
Fillets/Bond Breaker: Admil SupaSeal PU, hybrid sealant.
Membrane: WPA 500, one part fibre reinforced waterborne under tile membrane.
Balcony Edge Trim: Tile Edge Balcony Trim.
Transitions: Admil SupaSeal PU, hybrid sealant.
Membrane: WPA 230UV, one part fibre reinforced water-based polyurethane membrane.

SWIMMING POOL STRUCTURE

Primer: WPA 560, two-part water-based epoxy primer.
Transitions: WPA Elastoband.
Membrane: WPA 200, a highly flexible, two-part, cementitious waterproofing membrane.

POOL TERRACE AREA

Primer: WPA 460, two-part water-based epoxy primer.
Fillets/Bond Breaker: WPA Elastoband.
Membrane: WPA 200, a highly flexible, two-part, cementitious waterproofing membrane.

ROOFTOPS

Primer: Soprema Alsan EP 100 H20 primer.
Membrane: Soprema Alsan Trafik HP 520 (base coat).
Membrane: Soprema Alsan Trafik HP 530 (top coat).
Membrane: Soprema Alsan Trafik HP 540 (finish coat).

Download PDF Case Study