Bin Store and Fire Pump RoomÂ
Primer: Hychem E100 Epoxy Primer is a solvent-based, two-component epoxy primer.
Epoxy Flooring: Hychem SupaFloor, a high-build, multipurpose pigmented epoxy coating (1st coat).
Slip Resistance: Broadcast CA 60 or similar non-slip aggregate to refusal over the wet base coat.
Wear Coat: Hychem SupaFloor, a high-build, multipurpose pigmented epoxy coating (2nd coat).
Plant Room
Preparatory: Appropriate falls to drainage outlet in the substrate were waterproofed.Â
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Fillets /Â Bond Breaker: WPA FC, a high-performance, fast cure, one-component polyurethane sealant.
Membrane: WPA 992 UV, a self-levelling, one-part, liquid-applied, moisture-cured polyurethane waterproofing membrane, suitable for waterproofing in most applications.
Non-Slip Membrane: WPA 992 UV, a self-levelling, one-part, liquid-applied, moisture-cured polyurethane waterproofing membrane, which is suitable for waterproofing in most applications.
Planter Boxes
Preparatory: Appropriate falls to drainage outlet in the substrate were waterproofed.Â
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Membrane Protection: WPA Drainage Cell, a drainage cell and root-resistant protection board.
Window Reveals & SillsÂ
Primer: WPA 460, a two-part water-based epoxy primer
used to seal concrete and masonry surfaces.
Transitions: WPA SPUR, a high-quality, professional, universal, low-modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
Wet AreasÂ
Preparatory: Appropriate falls to drainage outlet in the substrate were waterproofed.Â
Primer: WPA 360, a water-based, low-solids, fast-drying primer.
Fillets / Bond Breaker: WPA SPUR, a high-quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 400, an elastomeric, fibre-reinforced waterproofing membrane based on high-performance polymer technology.
Balconies
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1Â (if required).
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Fillets / Bond Breaker: WPA SPUR, a high-quality, professional, universal, low-modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
Rooftop & Lift OverrunÂ
Primer: WPA 560, a two-part, water-based epoxy primer designed as a water andÂ
vapour-proof coating.
Fillets /Â Bond Breaker: WPA FC, a high-performance, fast-cure, one-component polyurethane sealant.
Membrane: WPA 3400, a two-component, 100% solids, rapid curing, spray applied, hybrid polyurea, elastomeric waterproofing membrane.
Topcoat: WPA ATC, an economic, aliphatic, single-component, liquid-applied, moisture-cured, polyurethane coating.
