Window Reveals & Sills (SPUR)
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Transitions: WPA SPUR, a high-quality, professional, universal, low-modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
Water TankÂ
Preparatory: Make sure the substrate is clean and free of defects or protrusions.
Coving: Aftek Penapatch Structural HB80, a high strength; high build shrinkage compensated repair mortar for vertical or horizontal applications.
Primer: WPA 560, a two-part, water-based epoxy primer designed as a water and vapour-proof coating.
Transitions: WPA Butyl Tape, a multipurpose self-adhesive sealing bandage designed for flashing and detailing a variety of surfaces.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Landscaped Areas
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Membrane Protection: WPA Drainage Cell, a drainage cell and root-resistant protection board.
Wet AreasÂ
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Primer: WPA 360, a water-based, low-solids, fast-drying primer.
Fillets / Bond Breaker: WPA SPUR is a high-quality, professional, universal, low-modulus sealant based on hybrid technology.
Membrane: WPA 500, a waterborne flexible waterproofing membrane specifically designed for use under ceramic and stone tile finishes.
Balconies & Sun Hoods
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.Â
Screed: ACS Traditional Floor Screed, a pre-blended screed underlayment specially formulated for internal & external floor areas, or site mixed screed in accordance with AS 3958.1Â (if required).
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Fillets / Bond Breaker: WPA SPUR, a high-quality, professional, universal, low modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
Exposed Concrete RoofÂ
Preparatory: Appropriate falls to drainage outlet in the substrate to be waterproofed.
Primer: WPA 560, a two-part, water-based epoxy primer designed as a water and vapour-proof coating.
Transitions: WPA SPUR, a high-quality, professional, universal, low-modulus sealant based on hybrid technology.
Membrane: WPA 230UV, a one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
Expansion Joints on Vertical ColumnsÂ
Backing Rod: Backer Rod, an extruded round, closed cell, low-density polyethylene.
Joint Sealant: WPA FC, a high-performance, fast-cure, one-component polyurethane sealant.
Primer: WPA 460, a two-part water-based epoxy primer used to seal concrete and masonry surfaces.
Transitions: WPA Elastoband, an innovative detailing system designed for waterproofing and sealing all types of points, junctions and general areas subject to movement.
Membrane: WPA 200, a highly flexible, two-part, rapid drying, cementitious waterproofing membrane (minimum of 2 coats to achieve a DFT of 1000 microns).Â
