Bin Store Room
Primer: Hychem E100 Epoxy Primer is a solvent-based, two-component epoxy primer, generally used to prime concrete surfaces prior to the application of the main coating products or systems.
EpoxyÂ
Flooring: Hychem SupaFloor is a multi-purpose, solventless epoxy flooring product designed to be used as either a smooth roller-applied coating or as a self-smoothing base to be broadcast with selected aggregates and sealed with a coat of itself. (1st coat).
Slip Resistance: Broadcast CA 60 or similar non-slip aggregate to refusal over the wet base coat.
Wear Coat: Hychem SupaFloor is a multi-purpose, solventless epoxy flooring product designed to be used as either a smooth roller-applied coating or as a self-smoothing base to be broadcast with selected aggregates and sealed with a coat of itself. (2nd coat).
Window Reveals
Primer: WPA 460 is a two-part water-based epoxy primer used to seal concrete and masonry surfaces.Â
Transitions: WPA MS is a single-component, moisture-cured silane-modified hybrid sealant free of solvents and isocyanates, with a very low VOC content.
Membrane: WPA 230UV one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
Garden/Planter Boxes
Primer: WPA 460 is a two-part water-based epoxy primer used to seal concrete and masonry surfaces.Â
Transitions: WPA Elastoband is an innovative detailing system designed for waterproofing and sealing all types of joints, junctions and general areas subject to movement.
Membrane: WPA 200 is a highly flexible, two-part, rapid-drying, cementitious waterproofing membrane, MembraneÂ
Protection: WPA Drainage Cell is a two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water-impermeable, recycled HDPE (High-Density Polyethylene) drainage membrane.
Internal Wet Areas
Primer: WPA 360 is a water-based, low-solids, fast-drying primer.
Fillets /Â Bond Breaker: WPA MS is a single-component, moisture-cured silane-modified hybrid sealant free of solvents and isocyanates, with a very low VOC content.
Membrane: WPA 500 is a waterborne flexible waterproofing membrane specifically designed for use under ceramic and stone tile finishes.
Ground Floor Terraces
Primer: WPA 460 is a two-part water-based epoxy primer used to seal concrete and masonry surfaces. Â
Fillets /Â Bond Breaker: WPA MS is a single-component, moisture-cured silane-modified hybrid sealant free of solvents and isocyanates, with a very low VOC content.
Membrane: WPA 500 is a waterborne flexible waterproofing membrane specifically designed for use under ceramic and stone tile finishes.
Balconies & Door RevealsÂ
Primer: WPA 460 is a two-part water-based epoxy primer used to seal concrete and masonry surfaces. Â
Fillets /Â Bond Breaker: WPA MS is a single-component, moisture-cured silane-modified hybrid sealant free of solvents and isocyanates, with a very low VOC content.
Membrane: WPA 500 is a waterborne flexible waterproofing membrane specifically designed for use under ceramic and stone tile finishes.
Lift Overrun
Primer: WPA 460 is a two-part water-based epoxy primer used to seal concrete and masonry surfaces. Â
Transitions: Admil SupaSeal PU is a low-modulus, Hybrid Polyurethane, flexible joint sealant and adhesive that is free of Isocyanates and other hazardous raw materials and omits low odour.
Membrane: WPA 230UV one-part fibre-reinforced water-based polyurethane membrane (minimum of 2 coats to achieve a DFT of 1000 microns).
